NetModule NB800 Series - Pptp; PPTP Administration

NBB-800
User Manual for NRSW version 4.5.0.100
5.6.3. PPTP
The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
between two hosts. PPTP is easy to configure and widely deployed amongst Microsoft Dial-up net-
working servers. However, due to its weak encryption algorithms, it is nowadays considered insecure
but it still provides a straightforward way for establishing tunnels.
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
OpenVPN
Administration
Tunnel Configuration
Client Management
IPsec
Administration
Tunnel Configuration
PPTP
Administration
Tunnel Configuration
Client Management
GRE
Administration
Tunnel Configuration
L2TP
Administration
Tunnel Configuration
PPTP Administration
PPTP administrative status:
enabled
disabled
Apply
Restart
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.33.: PPTP Administration
When setting up a PPTP tunnel, you would need to choose between server or client. A client tunnel
requires the following parameters to be set:
Parameter PPTP Client Settings
Server address The address of the remote server
Username The user-name used for authentication
Password The password used for authentication
Please note that username and password are not used when setting up clients with fixed addresses.
106