NetModule NB800 Series - Voice Gateway; Voice Gateway Administration

NBB-800
User Manual for NRSW version 4.5.0.100
5.7.17. Voice Gateway
Depending on your hardware, you can set up a voice gateway on the router which can be used to
connect mobile calls to VoIP clients and vice versa.
Administration
Administration Endpoints Routing
NB2800 NetModule Router Simulator
Hostname NB1800
Software Version 4.4.0.104
© 2004-2020, NetModule AG
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server
NTP Server
Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server
SNMP Agent
Web Server
MQTT Broker
Softflow
Discovery
Redundancy
Voice Gateway
Administration
Administrative status:
enabled
disabled
Call Routing:
Generic
SIP Settings
SIP status:
enabled
disabled
SIP interface:
LAN1
SIP port:
5060
SIP register expires:
150
seconds
Apply
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.54.: Voice Gateway Administration
The following parameters can be used to set it up:
Parameter Voice Gateway Administration Settings
Administrative status Specifies whether the gateway shall be enabled or disabled
Call routing Defines who will be responsible for call routing. If SDK has been spec-
ified you would need to install a script (see examples) which will be
responsible for routing and accepting the calls. Otherwise the static
routing configuration will be used.
SIP status Specifies whether the SIP agent will be enabled or disabled
156