NBB-800
User Manual for NRSW version 4.5.0.100
A. Appendix
A.1. Abbrevations
Parameter Description
ETHx Corresponds to Ethernet interfaces (either single or switched ones)
LANx LAN interfaces which are generally based on Ethernet interfaces (in-
cluding bridges)
WLANx Refers to a Wireless LAN interface which will be represented as addi-
tional LAN interface when configured as access point
WWANx Refers to a Wireless Wide Area Network (2G/3G/4G) connection
TUNx Specifies an OpenVPN tunnel interface (based on TUN)
TAPx Specifies an OpenVPN tunnel interface (based on TAP)
PPTPx Specifies a PPTP tunnel interface
MOBILEIPx Refers to a Mobile IP tunnel interface
SIMx Specifies the SIM slot as seen on the front panel
GNSSx Specifies a Global Navigation Satellite System module
Mobilex Identifies a WWAN modem
SERIALx Identifies a serial port
OUTx Specifies a digital I/O output port (DOx)
INx Specifies a digital I/O input port (DIx)
ANY Generally includes all options offered by the current section
APN Access Point Name
CID A Cell ID is a generally unique number used to identify each Base
Transceiver Station (BTS).
LAC The Location Area Code corresponds to an identifier of a set of base
stations that are grouped together to optimize signaling
LAI The Location Area Identity is a globally unique number that identifies
the country, network provider and location area
MSS Maximum Segment Size
MTU Maximum Transmission Unit
DNS Domain Name System
NAPT Network Address and Port Translation
DHCP Dynamic Host Configuration Protocol
SDK Script Development Kit which can be used to program applications
CLI Command Line Interface, a generic interface to query the router or
perform system tasks
SIM Subscriber Identity Module
199
To Next Page
Loading...
