NetModule NB800 Series - Automatic File Configuration

NBB-800
User Manual for NRSW version 4.5.0.100
Automatic File Configuration
File Configuration Automatic Updates
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
System
Settings
Time & Region
Reboot
Authentication
User Accounts
Remote Authentication
Software Update
Software Update
Modem Firmware Update
Software Profiles
Configuration
File Configuration
Factory Configuration
Troubleshooting
Network Debugging
System Debugging
Tech Support
Keys & Certificates
Licensing
Legal Notice
Automatic Updates
Status:
enabled
disabled
Time of day:
00:00
URL:
Apply
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.60.: Automatic File Configuration
This menu can be used to run an automatic configuration update of the system. It is configured as
follows:
Parameter Automatic File Configuration
Status Enable/disable an automatic configuration update
Time of day Time of day when the system should check for updates
URL The URL where the configuration file should be retrieved from (sup-
ported protocols are HTTP, HTTPS, TFTP, FTP)
174