NBB-800
User Manual for NRSW version 4.5.0.100
3.4.2. Default LED Indicators
The following table describes the NB800 (Rev. B02) status indicators.
Label Color State Function
STAT l blinking The device is busy due to startup, software or configuration up-
date.
l on The device is ready.
MOB l blinking Wireless link connection is establishing.
USR l on Wireless link connection is up.
m off Wireless link connection is down.
Table 3.3.: NB800 (Rev. B02) Status Indicators
Ethernet LEDs
The following table describes the Ethernet status indicators.
Label Color State Function
S
(Speed)
lg On Link (10 Mbit/s or 100 Mbit/s
m Off No Link
L/A
(Link/Ac-
tivity)
ly On Link
ly Blinking Activity
m Off No Link
Table 3.4.: Ethernet Status Indicators
3.4.3. Reset
The reset button has two functions:
1. Reboot the system:
Press at least 3 seconds to release a system reboot.
The reboot is indicated with the red blinking STAT LED.
2. Factory reset:
Press at least 10 seconds to release a factory reset.
The start of the factory reset is confirmed by all LEDs lighting up for a second.
18
To Next Page
Loading...
