NBB-800
User Manual for NRSW version 4.5.0.100
3.4. Interfaces
3.4.1. Overview
Nr. Label Function
1 LED Indicators LED Indicators for the different interfaces
2 PWR Power supply 12-24 VDC.
3 EXT1 Extension connector e.g. for CAN or COM/IO
4 ETH FastEthernet port, can be used as LAN or WAN interface.
5 Reset Reboot and factory reset button
6 USB USB 2.0 host port, can be used for software/configuration updates.
7 WLAN SMA female connectors for MIMO WLAN antenna. A3 is the main port, A4
is the auxiliary port.
8 BT SMA female connector (A3) for Bluetooth.
9 MOB SMA female connectors for LTE/UMTS antennas. A1 is the main, A2 the
auxiliary port
10 GNSS SMA female connector for GNSS
11 SIM Slot for 1 Micro SIM (3FF)
Table 3.2.: NB800 (Rev. B02) Interfaces
17
To Next Page
Loading...
