NBB-800
User Manual for NRSW version 4.5.0.100
5.7.5. Dynamic DNS
The Dynamic DNS client can be used to tell one or multiple DynDNS providers the current IP address of
your system. This address can be derived from the current hotlink interface or the outgoing interface
which will be used when contacting the server. We further support to ask the CheckIP service at
dyndns.org for obtaining the current Internet address which can be useful in NAT scenarios. The
DynDNS client will be triggered whenever a WAN or VPN link comes up.
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server
NTP Server
Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server
SNMP Agent
Web Server
Softflow
Discovery
Redundancy
Voice Gateway
DynDNS Administration
Administrative status:
enabled
disabled
DynDNS server:
active
inactive
DynDNS Update Services
Provider URL / Host Status
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.42.: Dynamic DNS Settings
We provide support for a bunch of common DynDNS operators but it is also possible to define a custom
update URL.
Please note that your NetModule router can operate as DynDNS server on its own, provided that you
have your hosts pointed to the DNS service of the router.
We can further operate the GnuDIP protocol and RFC2136-like dynamic DNS updates. The latter is in
general secured by a TSIG key.
128
To Next Page
Loading...
