NBB-800
User Manual for NRSW version 4.5.0.100
5.3.10. Bluetooth Low Energy
If a Bluetooth interface is available it can be used either with the SDK scripting engine or forwarded to
the Virtualization.
Bluetooth Settings
This page can be used to assign the Bluetooth module either to SDK or Virtualization or to turn Blue-
tooth functionality off.
It can be configured as follows:
Parameter Bluetooth Settings
Administrative status Enables the module for SDK or Virtualization
If you enable the module for SDK usage you need a SDK script that handles the hardware interface.
You can start advertising or scanning mode and setup parameters via SDK. Please have a look at the
SDK API for detailed description.
If you enable the module for Virtualization there will be no interaction to the module from the host
system. It is in your responsibility to use it correctly. Please refer to our examples and documentation
in the public Wiki.
74
To Next Page
Loading...
