NetModule NB800 Series - Itxpt; Itxpt Configuration

NBB-800
User Manual for NRSW version 4.5.0.100
5.7.16. ITxPT
This is an integration of the ITxPT standard v2.0.1. (see ITxPT Onboard Architecture Specifications
v2.0.1)
Configuration
Figure 5.49.: ITxPT configuration
The following parameters can be used to set it up:
Parameter ITxPT Administration
Administrative status Specifies whether the ITxPT functionality should be enabled or dis-
abled.
Network Interface Specifies the network interface on which the Service should operate
on.
Notes.
148