NetModule NB800 Series - Scanning Networks; Sending E-Mail or SMS; Updating System Facilities

NBB-800
User Manual for NRSW version 4.5.0.100
ipsec IPsec connection status
pptp PPTP connection status
gre GRE connection status
dialin Dial−In connection status
mobileip MobileIP status
dio Digital IO status
audio Audio module status
can CAN module status
uart UART module status
ibis IBIS module status
redundancy Redundancy status
sms SMS status
firewall Firewall status
qos QoS status
neigh Neighborhood status
location Current Location
6.7. Scanning Networks
The scan command can be used to scan for available WWAN and WLAN networks.
> scan −h
Usage :
scan [− hs ] <interface >
Options :
−s generate sourceable output
6.8. Sending E-Mail or SMS
The send command can be used to send a message via E-Mail/SMS to the specified address or phone
number.
> send −h
Usage :
send [− h ] <type > <dest > <msg>
Options :
<type > type of message to be sent ( mail , sms , techsupport , ussd )
<dest > destination of message ( mail−address , phone−number or index )
<msg > message to be sent
6.9. Updating System Facilities
The update command can be used to perform various system updates.
> update −h
Usage :
update [− hfrsn ] <software | config | license | sshkeys > <URL >
190