NBB-800
User Manual for NRSW version 4.5.0.100
IP Settings
This page can be used to configure IP addressing for your LAN/WAN Ethernet interfaces. In addition
to the primary IP address/subnet mask you may define an additional IP address alias on the interface.
Please keep in mind that the DNS servers can be set globally in the DNS server configuration menu.
But as soon as a link comes up it will use the interface-specific name-servers (e.g. the ones being
retrieved over DHCP) and update the resolver configuration accordingly.
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
WAN
Link Management
Supervision
Settings
Ethernet
Port Setup
VLAN Management
IP Settings
Mobile
Modems
SIMs
Interfaces
WLAN
Administration
Configuration
IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
IP Address Management
Network
Interface
Mode IP Address Mode IP Address Netmask
LAN1 LAN Static IP 192.168.1.1 24
LAN1-1 LAN Static IP 192.168.101.1 24
LAN1-2 LAN Static IP 192.168.102.1 24
LAN2 WAN DHCP mode n/a -1
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 5.9.: LAN IP Configuration
Parameter LAN IP Settings
Mode Defines whether this interface is being used as LAN or WAN interface
When running in LAN mode, the interface may be configured with the following settings:
Parameter LAN IP Settings
IP address The IP interface address
Subnet mask The subnet mask for this interface
Alias IP address The alias IP interface address
45
To Next Page
Loading...
