EasyManua.ls Logo

NetModule NB800 Series - Gnss; WLAN Antenna Port Specification; GNSS Specifications Option G; GNSS; GPS Antenna Port Specification

NetModule NB800 Series
225 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NBB-800
User Manual for NRSW version 4.5.0.100
Note: 802.11n supports 2x2 MIMO in 2.4 GHz and 1x1 in 5 GHz.
The WLAN antenna ports have the following specification:
Feature Specification
Max. allowed cable length 30 m
Max. allowed antenna gain
including cable attenuation
3.0 dBi
1
Min. distance between collocated ra-
dio transmitter antennas
(Example: WLAN1 to MOB1)
20 cm
Min. distance between people and an-
tenna
40 cm
Connector type SMA
Table 3.8.: WLAN Antenna Port Specification
3.4.7. GNSS
Feature Specification
Systems GPS/GLONASS/GALILEO/BEIDOU
Data stream JSON or NMEA
Tracking sensitivity up to -162 dBm
Supported antennas Active and passive
Table 3.9.: GNSS Specifications option G
The GNSS antenna port have the following specification:
Feature Specification
Max. allowed cable length 30 m
Max. allowed antenna gain 3.0 dBi
Min. distance between collocated ra-
dio transmitter antennas
(Example: GNSS to MOB1)
20 cm
Connector type SMA
Table 3.10.: GNSS / GPS Antenna Port Specification
1
Note: WLAN antennas with a higher amplification may be used with the NetModule router "Enhanced-RF-Configuration"
software license and the antenna gain and cable attenuation that have been correctly configured by certified specialized
personnel.
20

Table of Contents

Related product manuals