EasyManua.ls Logo

NetModule NB800 Series - Static Route Flags

NetModule NB800 Series
225 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NBB-800
User Manual for NRSW version 4.5.0.100
Parameter Static Route Configuration
Destination The destination address of a packet
Netmask The subnet mask which forms, in combination with the destination,
the network to be addressed. A single host can be specified by a
netmask of 255.255.255.255, a default route corresponds to 0.0.0.0.
Gateway The next hop which operates as gateway for this network (can be
omitted on peer-to-peer links)
Interface The network interface on which a packet will be transmitted in order
to reach the gateway or network behind it
Metric The routing metric of the interface (default 0), higher metrics have the
effect of making a route less favorable
Flags (A)ctive, (P)ersistent, (H)ost Route, (N)etwork Route, (D)efault Route
The flags obtain the following meanings:
Flag Description
A The route is considered active, it might be inactive if the interface for this route is not yet
up.
P The route is persistent, which means it is a configured route, otherwise it corresponds to
an interface route.
H The route is a host route, typically the netmask is set to 255.255.255.255.
N The route is a network route, consisting of an address and netmask which forms the
subnet to be addressed.
D The route is a default route, address and netmask are set to 0.0.0.0, thus matching any
packet.
Table 5.43.: Static Route Flags
76

Table of Contents

Related product manuals