NBB-800
User Manual for NRSW version 4.5.0.100
Parameter Voice-Over-Mobile Audio Profiles
Speakerphone Handle situations of loud echo with extreme acoustic distortion.
This mode is intended for use with a car kit or speakerphone appli-
cations with high volume and high distortion. Acoustic echo in this
situation has negative ERL and is impossible to cancel completely. It
operates in a half-duplex manner and will be very aggressive in mut-
ing the entire signal to prevent any echo blips from being heard.
Bluetooth Provides moderate echo, long delay (up to 64-ms dispersion).
This mode is intended for bluetooth headsets and carkits which may
have DSP processing on board and could give added delay to the
system.
Parameter Endpoint Settings Voice-Over-Mobile
Modem Specifies the modem which will be used for voice-over-mobile calls
Audio profile Specifies the modem’s audio profile
Volume level Specifies the modem’s volume level - 1 = low
Parameter Endpoint Settings SIP (registrar)
Subscriber The subscriber name for a registering SIP client
Username The username for a registering SIP client
Password The password for a registering SIP client
Parameter Endpoint Settings SIP (direct)
Subscriber The subscriber name of the SIP agent
Host The IP address of the SIP agent
Port The port of the SIP agent
Username The username to authenticate at the SIP agent
Password The password used for autentication
Parameter Endpoint Settings SIP (user-agent)
Host The IP address of the remote SIP registrar
Port The port of the registrar
Domain The domain name used at the registrar
Subscriber The subscriber name used at the registrar
Username The username to authenticate at the registrar
Password The password used for autentication
158
To Next Page
Loading...
