NBB-800
User Manual for NRSW version 4.5.0.100
Available keys :
output Output format ( html , plain )
usr Username to be used for authentication
pwd Password to be used for authentication
command Command to be executed
arg0 . . arg31 Arguments passed to commands
Notes :
The commands correspond to CLI commands as seen by 'cli -l' , the
arguments ( arg0 . . arg31 ) will be directly passed to cli .
Thus , an URL containing the following sequence :
command=get&arg0=admin . password&arg1=admin . debug
will lead to cli being called as :
cli get "admin . password" "admin . debug "
It supports whitespaces but please be aware that any special characters in
the URL must be specified according to RFC1738 ( usually done by common
clients such as wget , lynx , curl ) .
Response :
The returned response will always contain a status line in the format :
<return > : <msg>
with return values of OK if succeeded and ERROR if failed . Any
output from the commands will be appended .
Examples :
OK : status command successful
ERROR : authentication failed
status - Display status information
Key usage :
command=status [& arg0=<section > ]
Notes :
Available sections can be retrieved by running
command=status&arg0=−h .
Please note that the status summary can be displayed without authentication .
Examples :
http : / / 1 9 2 . 1 6 8 . 1 . 1 / cli . php?version=2&output=html&usr=admin&pwd=admin01&command=
status&arg0=−h
http : / / 1 9 2 . 1 6 8 . 1 . 1 / cli . php?version=2&output=html&usr=admin&pwd=admin01&command=
status&arg0=summary
194
To Next Page
Loading...
