NetModule NB800 Series - Page 224

NBB-800
User Manual for NRSW version 4.5.0.100
Event Description
remote-mail.are This script reads and sends mails from a remote IMAP/POP3/SMTP
server
scan-mobile.are This script can be used to switch the Mobile LAI according to available
networks
scan-wlan.are This script can be used to switch the WLAN client network according
to availability
send-mail.are This script will send an E-Mail to the specified address.
send-sms.are This script will send an SMS to the specified phone number.
send-techsupport.are This script will generate a techsupport and send it to the specified
E-Mail address.
serial-read.are This script can be used to read messages from the serial port.
serial-readwrite.are This script will write to and read from the serial port.
serial-tcp-broadcast.are This script reads messages coming from the serial port and forwards
them via TCP to remote hosts (and vice versa).
serial-tcsetattr.are This script can be used to set/get the attributes of the serial port.
serial-udp-server.are This script reads messages coming from the serial port and forwards
them via UDP to a remote host (and vice versa).
serial-write.are This script can be used to write a message to the serial port.
set-ipsec-route.are set route to IPSEC server depending on active WWAN / WLAN net-
work
sms-confirm.are This script will send out a message and confirm its delivery.
sms-control.are This script will execute commands received by SMS.
sms-delete-inbox.are This script can be used to flush the SMS inbox.
sms-read-inbox.are This script can be used to read the SMS inbox.
sms-to-email.are This script will forward incoming SMS messages to a given E-mail
address.
sms-to-serial.are This script can be used to write a received SMS to the serial port.
snmp-agent.are This script extends MIB entries of the SNMP agent
snmp-cmd.are This script issues SNMP set/get commands
snmp-trap.are This script can be used to send SNMP traps
status.are This script can be used to display all status variables
syslog.are Throw a simple syslog message.
tcpclient.are This script sends a message to a TCP server.
tcpserver.are This script implements a TCP server which is able to receive mes-
sages.
techsupport.are This transfers a techsupport to a remote FTP server
224