NBB-800
User Manual for NRSW version 4.5.0.100
Running as mesh point, you can further configure the following settings:
Parameter WLAN Mesh-Point Management
Operation type Specifies the desired IEEE 802.11 operation mode
Radio band Selects the radio band to be used for connections, depending on your
module it could be 2.4 or 5 GHz
Channel Specifies the channel to be used
Note: 802.11n with 2x2 MIMO in 2.4 GHz and 1x1 in 5 GHz.
55
To Next Page
Loading...
