Nets NETS - Operator Name

34
To program the group names:
1. Enter ‘Main menu’, and follow 2 steps below.
2. Press
3
-
2
.
3. Enter the group number you wish to edit. This number must be
from 1 to 20. You will see the group number in the Total Price
Display.
4. Press
PRINT
or
Enter
.
5. Type a group name that you wish to use for this group. As you
type the name, you will see it displayed in the Alpha Display.
6. Press
PRINT
or
Enter
.
7. The group name was stored and the scale automatically moves
on to the next group number which is displayed in the Total Price
display.
8. If you wish to program the next group name, then you can go
back to step 5; otherwise, press
ESC
.
9. You can go back to step 3 to specify another group number you
may wish to edit or you can press
ESC
ESC
SET
to finish.
10. You are back in the Initial State.
3-3. Operator Name
If multiple operators use a scale, you can assign a operator number to
each operator so that you can discern who sold the item. If you wish to
print operator name on label, you should enter the operator number
P5-2-3 Operator Assignment
. Additionally, sales reporting can also be
made easy using operator numbers in receipt mode.