37
3-5. Scroll Message
You can print the scroll message and address or any other pertinent
information in receipt mode at the bottom of each receipt; You can type
the message.
To program the Sale Message:
1. Enter ‘Main menu’, and follow 2 steps below.
2. Press
.
3. Enter the scroll message number you wish to edit. This number
must be from 1 to 15. You will see the scroll Message number in
the Total Price Display.
4. Press
.
5. Type a scroll message name that you wish to use for this scroll
message. As you type the name, you will see it displayed in the
Alpha Display.
6. Press
.
7. The scroll message name was stored and the scale automatically
moves on to the next scroll message number which is displayed
in the Total Price display.
8. If you wish to program the next scroll message name, then
you can go back to step 5; otherwise, press
.
9. You can go back to step 3 to specify another scroll message
number you may wish to edit or you can press
to finish.
10. You are back in the Initial State.
To Next Page
Loading...