73
4. As you type, the number will appear in the Total Price Display.
Press
. Now select the last (ending) PLU number for
your list. The Unit Price Display will show the starting PLU number
and the Total Price Display will show the ending PLU number. When
the scale prints the labels, it will NOT wait for you to take them before
it prints
out the next one; therefore, we recommend that you do not thread the
backing paper to the pick-up spool for this operation. Instead, have
the backing paper feed out with the labels as they are printed so that
they do not “peel-off.” When you are ready to start printing, press
.
5. The scale will sequentially go through every PLU in the range that
you specified and print out a verification label for those PLUs that it finds.
6.Once the scale is finished printing, press
to exit and return
to the Initial State.
8-3. Delete PLU
The NETS can store up to 1000 PLU. Although this is enough for most
applications, there may come a time that you might want to delete some
PLUs to remove unused or erroneous PLUs.
When you display the PLU, you cannot specify a range; therefore, you
Must toggle through ALL of the PLUs or press
to finish
rematurely.
We recommend that you purchase the NETS Software Package if you
are going to be dealing with over 100 PLUs.
To Next Page
Loading...
General