4
Assembling the Display
Once you have unboxed your NETS you must carefully
instructions below on how to assemble the Pole Display.
Installation Pole Display:
1. Connect the display connectors together.
2. Place the Pole Display properly into the bracket making sure
that the connectors are slipped inside of the pole (upwards.)
3. Attach the two display pole screws (Pan Screw M4x8) to
securely fasten the pole to the bracket.
4. Finally, attach the bracket-plate to the bracket and fasten it
with the 4 smaller screws (Pan Screw M3x6).
Note
: Make certain that none of the wires are being crimped when you
are installing the pole display.
Scale Overview
The NETS is a simple price com
puting label printing scale. There are
certain parts of the scale that you may need to become familiar with in
order to properly maintain and operate the scale.
Take a look at the diagrams provided and the table following
most vital components of the scale that are
involved in day-to-day operations and maintenance.
To Next Page
Loading...
General