Networker TS900 - Part-Setting with Part Set Passcodes

Part-Setting With Part Set Passcodes
Passcodetypes “Code Set Group A”,“CodeSet Group B”,“CodeSet Group C”, and the “Full Set
Group” enable the user to set and unset only the wards assigned to their “Code Set Group”. The
“Code Set Groups” are configured by the master user or installation company (see “Code Set
Groups” on page 40).
The following example shows how to set and unset wards A and B using the passcode type
“Code Set Group A”. The example first assumes that the alarm system is initially unset.
»
To set your area(s) using a “Code Set Group” passcode, proceed as fo llows:
1. Enter your “Code Set Group” passcode
? ? ? ?. The exit sounder will start. If
necessaryleavethe areaviatheprescribed
exit route. The display will show the
remaining exit time, e.g.,
2. The system is part-set when the exit time
has expired, on activation of the Final Exit
circuit or by pressing the Exit Terminator
button, as appropriate. When the system
has part-set the display will show the wards
that are set and the time e.g.,
»
To unset your area(s), proceed as follows:
1. Enter the area or premises via the
prescribed entryrouteandproceed directly
totheremotekeypad.Theinternalsounders
generate an interrupted tone. The display
will show the remaining entry time, e.g.,
2. Enter your “Code Set Group” passcode
? ? ? ? within the entry time. The
internal sounders will stop and the display
will show:
3. After 5 seconds the “SYSTEM OPEN”
message will disappear and the display will
show the time, (date and banner text, LCD
only) e.g.,
The “Code Set Group” passcodesmay be used when the system is fully set. When thepasscode
is entered only those wards assigned to the “Code Set Group” will be unset.
The following example shows how to unset wards A and B using the passcode type “Code Set
Group A”. The example first assumes that the alarm system is initially full set.
8
Operating The System TS790 & TS90 0 User Manual
Wards set [ AB ]
05:30 Sun 28 APR
PART SET
P
.
SET
AB
AB
05.30
05
.
30
Please Exit Now.
Time left > 0025
LCD
0025
Starburst
0025
LED
Enter Your Code
Time left > 0025
LCD
0025
Starburst
0025
LED
SYSTEM OPEN
08:30 Sun 28 APR
OPEN
OPEN
ABC SECURITY
08:30 Sun 28 APR
08:30
08
.
30