39
ECO Mode
CAUTION
Please switch off the display when it is not in use, and enable the Audio Only
function when you do not need to watch the display. This will help to reduce
power consumption and save energy.
Energy consumption can be reduced by lowering display brightness.
To
better save energy, the automatic power-off function is configured for the
display with the default duration set for 10 minutes. If no operation is
performed in 10 minutes, the display is switched automatically to sleep mode
(the same as power off) to reduce energy consumption.
In the ECO mode, the power output is reduced by 50%.
In the Auto mode, the display automatically adjusts the screen brightness according to the
light in the environment. When the lighting in the room is strong, the screen brightens. When
the lighting in the room is weak, the screen darkens.
In the Standard mode, the screen brightness stays the same.
Press ECO on the remote control to enter the backlight mode page. Press ECO to
s
witch among ECO, Auto and Standard.
●
●
●
●
●
●
To Next Page