NewLine TRUTOUCH - Operational Safety Guidelines

02
WARNING
Do not open the cover or change the product on your own.
High voltage components are installed in the product. When you open the cover,
high voltage, electric shock, or other dangerous situations may occur. If inspection,
adjustments, or maintenance is required, contact the local distributor for help.
Use the specied power supply.
● Do not use any types of power cables other than the one provided with the
product to prevent the product from being damaged.
● Use a three-pronged socket and ensure that it is properly grounded.
● Pull out the power plug from the socket if the product is not used for an extended period.
Before you move the product, disconnect all external connections and
remove all mounting devices.
Move the product carefully to prevent it from being damaged, especially the
screen, which may cause injury if broken.
Clean the power plug regularly.
● When you are cleaning, fire or electric shock may be caused if the product is
powered on.
● Keep in mind to pull out the power plug before cleaning it.
Do not put items on the top of the product.
● Do not put items, such as a container for liquid (like a vase, flowerpot,
cosmetics, or liquid medicine) on top of the product.
● If any water or liquid is spilled on the product, a short circuit may occur and
cause fire or electric shock
● Do not step on the product or hang any items on the product.
Do not install the product in an improper place.
● Do not install the product in humid places, such as in a bathroom, near windows,
or in outdoor environments where there might be rain, snow, or other harsh
weather. The preceding environments may cause faults or electric shock under
their extreme conditions.
● Do not put an exposed fire source, such as an ignited candle, on the product.
Do not cover or block any vents on the product.
● Any overheated components may cause fire, damage the product, and
shorten the service life.
● Do not put the venting surface of the product face down.
● Do not install the product on carpet or cloth.
● Do not use a cloth, such as a table cloth, to cover the product.
Do not touch the power cable with wet hands to avoid electric shock.