Newport Electronics INFINITY Series - Reading Configuration (Rd.cf); Color Configuration (Colr)

4
Configuring The Meter
4.3 READING CONFIGURATION ("RD.CF")
To determine if your meter shows in °F (Fahrenheit) or °C (Celsius).
1. Press the MENU button until the meter shows "RD.CF" .
2. Press the
䊳
/DEV button. The meter shows one of the following:
* "R.1=F" (°F)
* "R.1=C" (°C)
3. Press the
䊱
/MAX button to toggle between choices.
4. Press the MENU button to store your selection. The meter momentarily shows "STRD",
followed by "S1.CF" (Setpoint 1 Configuration).
4.4 COLOR CONFIGURATION ("COLR")
Refer to Table 6-1 for a summary list of menu configuration.
Selecting “Display Color” is not active unless your meter is a Version “B”.
To select a display color, follow these steps:
1. Press the MENU button until the meter shows “COLR”.
2. Press the ∂DEV button. The meter shows one of the following:
•“GRN”
•“REd”
•“AMbR”
3. Press the ßMAX button to scroll between available choices.
4. Press the MENU button to store your choice. The meter momentarily shows “StRd”,
followed by the next menu “S1.CF” (Setpoint 1 Configuration). Or you can press the
RESET button to abort and go back to the “Rd.CF” menu.
20
Note
☞