Newport Electronics INFINITY Series - Table 6-2. Front Panel Displays

35
Menu Configuration
Not all menu items display on standard meters.
Table 6-2. Front Panel Displays
6
OT.S.O
Output Scale & Offset
Enter new value
& show "OUT1"
Enter new value
& show "RD 2"
Enter new value &
show "OUT2"
Show
"RD 1" & prior value
Scroll right one digit
Show prior value
Scroll right one digit
Show prior value
Scroll right one digit
Show prior value
Change flashing digit's value
Change flashing digit's value
Change flashing digit's value
Change flashing digit's value
T.OFF
RTD Temperature
Offset
LK.CF
Lock Out
Configuration
bRIt
Brightness
Configuration
Show actual or
prior value
RS=
SP=
L3=
Change flashing digit's value
E (Enable RESET button in
run mode)
D (Disable RESET button in
run mode)
E
(Enable setpoint changes)
D (Disable setpoint changes)
0 (SETPTS button display
setpoint values)
1(SETPTS button display
firmware version v.-
8
.
8
where
8
is 0~9)
M.brt (Medium Brightness)
L.brt (Low Brightness)
H.brt (High Brightness)
MENU
䊳/DEV 䊱/MAX
(Defaults in Bold and Italics)