39
Specifications
8
ANALOG OUTPUT (if applicable)
Signal type: Current or voltage
Signal level: Current: 10 V max compliance at 20 mA output
Voltage: 20 mA max for 0-10 V output
Function: May be assigned to a display range or proportional control
output with setpoint #1 when used as a control output.
Linearity: 0.2%
Load Regulation: 1.1%
Line Regulation: 0.02% /V ac
Step Response Time: 2 - 3 seconds to 99% of the final value
INPUT POWER INFORMATION:
~ AC units 115/230 V~(AC) ±10%, 50/60 Hz
7 W max, power consumption (Non-Isolated Analog Output)
8 W max, power consumption (Isolated Analog Output)
DC units 10-32 Vdc
6 W max, power consumption (Non-Isolated Analog Output)
7 W max, power consumption (Isolated Analog Output)
External Fuse Required:
IEC 127-2/III
Power Fuse
115 V 125 mA @ 250 (T)
230 V 63 mA @ 250 (T)
UL 248-14 (Listed Fuse)
Power Fuse
115 V 175 mA @ 250 V Slow-Blow
230 V 80 mA @ 250 V Slow-Blow
ENVIRONMENT
Operating temperature: 0 to 50°C (32° to 122°F)
Storage temperature: -40° to 85°C (-40° to 185°F)
Relative humidity: 90% at 40°C (non-condensing)
MECHANICAL
Panel cutout: 1/8 DIN 3.62 x 1.78" (92 x 45 mm)
Weight: 1.27 lb (574 g)
Case material: Polycarbonate, 94 V-O UL rated
To Next Page
Loading...
