Newtec EL470 - Page 115

Modem Reference Manual for EL470 IP Satellite Modem
Command
DmBuSynRate
Backup symbol rate Backup symbol rate %
SNMP Table ntcDevsMod01DemodulatorExtEntry
Command ntcDevsMod01DmBuSynRate
OID 1.3.6.1.4.1.5835.3.1.13000.1.18.1.1.[1 .. 2]
Values GUI Unit
Mbaud
Cmd Unit Factory Default (CU)
baud 27.500000
Expert Range (CU)
-1e+38 .. 1e+38
Command
DmBuSwitchTimeout
Carrier switch delay Carrier switch delay
Location /Modem/Control/Demodulation/Backup carrier
Description
Mininum time interval (in seconds) between consecutive demodulator
carrier switch operations.
RMCP
Command
DST Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01DemodulatorEntry
Command ntcDevsMod01DmBuSwitchTimeout
OID 1.3.6.1.4.1.5835.3.1.13.1.148.1.1
Values GUI Unit
sec
Cmd Unit Factory Default (CU)
sec 60
Expert Range (CU)
2 .. 1000
Command
DmBuEnable
Carrier switching
enable
Carrier switching en
Location /Modem/Control/Demodulation/Backup carrier
Description
This configuration variable is used to enable switching between
demodulation carriers.
RMCP
Command
BDM Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01DemodulatorEntry
Command ntcDevsMod01DmBuEnable
OID 1.3.6.1.4.1.5835.3.1.13.1.146.1.1
Values Factory Default
disabled
Enumeration Value
Disabled
Enabled
0
1
Command
DmBuSwitchCnt
Carrier switch count Carrier switch count
Location /Modem/Control/Demodulation/Backup carrier
Description
The number of times we have dynamically switched to another carrier
(with or without success).
RMCP
Command
csc Access Normal user : R
Expert user : R
version 3.1
108
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS