Modem
Reference Manual for EL470 IP Satellite Modem
Command
IfPacketLogAction
Action Action
Count
Rx to packet mon
2
3
Command
IfPacketLogFiltPat
Filter Filter
Location /Modem/Monitor/Interfaces/Ethernet/Packet Mon
Description
Configuration of the packet log filter. Only packets that match this filter are
logged. This filter exists of a sequence of criteria that are combined as a
logical AND.
Possible criteria are:
• eth.dst==00:11:22:33:44:55 (hex)
• eth.src==00:11:22:33:44:55 (hex)
• ip.src==1.2.3.4
• ip.dst==1.2.3.4
• udp.dst==5001 (or 0x1389)
• raw[12]==ab (hex)Remark: To remove the packet filter, you can
enter a dummy string of 1 character (e.g. "-").
RMCP
Command
pfi Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfPacketLogFiltPat
OID 1.3.6.1.4.1.5835.3.1.4.1.220.1.1
Values Factory Default String Description
length : 0 .. 128
format : any chars
Command
IfPacketLogFilter
Probe Probe
Location /Modem/Monitor/Interfaces/Ethernet/Packet Mon
Description
Configuration of the packet log probe to define which packets can be
logged to the packet log buffer.
RMCP
Command
plf Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfPacketLogFilter
OID 1.3.6.1.4.1.5835.3.1.4.1.196.1.1
Values Factory Default
allErrors
Enumeration Value
All errors
No logging
All Eth packets
All EthRx packets
All EthTx packets
All EthRx errors
All EthTx errors
ARP Rx packets
ARP Tx packets
0
1
2
3
4
5
6
7
8
version 3.1
126
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
