Newtec EL470 - Page 174

Modem Reference Manual for EL470 IP Satellite Modem
Special Command
SyConfigSaveFlash
Save Save
Location /Config
Description
Configuration command to save a configuration to permanent memory. Up
to 48 different configurations can be saved. Remember that the default
boot configuration has to be saved in configuration 0 since this is the one
that is loaded when the device (re)-boots.
RMCP
Command
SCF Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyConfigSaveFlash
OID 1.3.6.1.4.1.5835.3.1.1.1.4.1.1
Get Command Arguments Set Command Arguments
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
none none SyConfigNum 230
Get Reply Values Set Reply Values
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
SySaveConfNum 231 SyConfigStatus 230
Special Command
SyCfgName
Name Name
Location /Config
Description
Configuration command for the configuration's name. The configuration
name will be displayed on the front panel in order to allow easier
identification of a certain saved configuration.
RMCP
Command
SCn Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyCfgName
OID 1.3.6.1.4.1.5835.3.1.1.1.58.1.1
Get Command Arguments Set Command Arguments
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
SyConfigNum 230 SyConfigNum
SyConfigName
230
231
Get Reply Values Set Reply Values
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
SyConfigNum
SyConfigName
230
231
SyConfigStatus 230
version 3.1
167
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS