Newtec EL470 - Page 238

Modem Reference Manual for EL470 IP Satellite Modem
Variable
SyConfigStatus
Configuration status Configuration status
SyCfgName 167
Description
Variable that replies the status after load and save configuration
operations.
Values Factory Default Enumeration Value
Success
Failed
0
1
Variable
SyLoadConfNum
Last loaded config
number
Loadd conf. num.
Used as
variable of
Command(s)
SyConfigLoadFlash
Page
166
Description
The last loaded configuration number variable contains the specifier for
last loaded configuration in internal flash.
Values GUI Unit
NA
Cmd Unit Factory Default (CU)
NA -1
Expert Range (CU)
-1 .. 4
Variable
SySaveConfNum
Last saved config
number
Saved conf. num.
Used as
variable of
Command(s)
SyConfigSaveFlash
Page
167
Description
The last saved configuration number variable specifies the last saved
configuration in internal flash.
Values GUI Unit
NA
Cmd Unit Factory Default (CU)
NA -1
Expert Range (CU)
-1 .. 4
Variable
SyConfigName
Configuration name Configuration name
Used as
variable of
Command(s)
SyCfgName
Page
167
Description
Variable that contains the configuration name. This name will be visible in
the top-row of the display when browsing through the different stored
configurations.
Values Factory Default
def
String Description
length : 0 .. 20
format : any chars
Variable
AlAlarmString
Alarm string Alarm string
Used as
variable of
Command(s)
AlAlarmsCur
AlAlarmsMem
Page
246
247
version 3.1
231
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS