Modem
Reference Manual for EL470 IP Satellite Modem
Command
IfChConfigEthTxISI
IN ISI IN ISI
Used as
variable of
Command(s)
IfChConfigEthTx
Page
58
Description
Configuration of the DVB-S2 input stream identifier. The DVB-S2 input
stream identifier or ISI is present in the second byte position of the
MATYPE field in the baseband header of a DVB-S2 baseband frame. It is
a single byte identifying the encapsulated stream in case of multiple input
streams. When the modulator input format consists of baseband frames,
this value is used for filtering the matching stream for dedicated
processing like network clock reference insertion or monitoring.
In all other cases (e.g. a MPEG transport stream or generic stream
inputs), this input stream identifier value is filled-in in the MATYPE field of
the generated baseband frames.
RMCP
Command
ITi Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfChConfigEthTxISI
OID 1.3.6.1.4.1.5835.3.1.4.1.70.1.1
Values Factory Default
00
String Description
length : 0 .. 2
format : Hexadecimal chars
Command
IfChConfigEthTxPID
IN PID IN PID
Used as
variable of
Command(s)
IfChConfigEthTx
Page
58
Description
Configuration of the PID of the incoming MPEG transport stream from
which the Ethernet packets in a channel configuration are extracted.
RMCP
Command
ITP Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfChConfigEthTxPID
OID 1.3.6.1.4.1.5835.3.1.4.1.72.1.1
Values GUI Unit
NA
Cmd Unit Factory Default (CU)
NA 0
Expert Range (CU)
0 .. 8192
Command
IfChConfigEthTxAirMac
IN Air-MAC address IN Air-MAC address
Used as
variable of
Command(s)
IfChConfigEthTx
Page
58
Description
Configuration of the Air-MAC address if the decapsulator has enabled the
Air-MAC destination addressing.
RMCP
Command
ITA Access Normal user : RW
Expert user : RW
version 3.1
180
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
