Newtec EL470 - Page 198

Modem Reference Manual for EL470 IP Satellite Modem
Command
IfBriIfEnable
Active Active
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfBriIfEnable
OID 1.3.6.1.4.1.5835.3.1.4.1.182.1.1
Values Factory Default
disabled
Enumeration Value
Disabled
Enabled
0
1
Command
IfBriIfLocalVlan
Local VLAN Local VLAN
Used as
variable of
Command(s)
IfBriIfEntry
Page
57
Description
Configuration of the local VLAN of this IP interface.
RMCP
Command
BLv Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfBriIfLocalVlan
OID 1.3.6.1.4.1.5835.3.1.4.1.187.1.1
Values GUI Unit
NA
Cmd Unit Factory Default (CU)
NA 0
Expert Range (CU)
0 .. 4095
Command
IfBriIfLocalIp
Local IP address Local IP address
Used as
variable of
Command(s)
IfBriIfEntry
Page
57
Description
Configuration of the IP address assigned to the local IP interface. When
the host part is zero (= the part of the IP address that is not masked by the
netmask of this interface), it means that there is no IP address assigned to
this interface.
RMCP
Command
BLi Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfBriIfLocalIp
OID 1.3.6.1.4.1.5835.3.1.4.1.185.1.1
Values Factory Default
0.0.0.0
String Description
length : 0 .. 15
format : \d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}
version 3.1
191
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS