Newtec EL470 - Page 64

Modem Reference Manual for EL470 IP Satellite Modem
Command
IfVLANTypeId
VLAN type id VLAN type id
Location /Modem/Control/Interfaces/Ethernet/ipencap
Description
This field defines the VLAN type identifier. It can be used to filter on the
outer VLAN tag in a QinQ frame (standardized as 0x9100). This device
filters on maximum 1 VLAN tag.
RMCP
Command
vtp Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfVLANTypeId
OID 1.3.6.1.4.1.5835.3.1.4.1.281.1.1
Values Factory Default
8100
String Description
length : 4 (fixed)
format : Hexadecimal chars
/Modem/Control/Interfaces/Ethernet/IP encap-decap/IP interface table
Structured Command
IfBriIfEntry
IP interface table IP interface table
Location /Modem/Control/Interfaces/Ethernet/encap-decap/IP interface table
Description
Configuration of the IP interface entry that contains the configuration
parameters of an IP subnet that is bridged or routed over the satellite link.
RMCP
Command
Bte
array : [1 .. 32]
Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfBriIfEntry
OID 1.3.6.1.4.1.5835.3.1.4.1.183.1.1.[1 .. 32]
Variables
IfBriIfEnable
IfBriIfLocalVlan
IfBriIfLocalIp
IfBriIfLocalIpMask
IfBriIfLocalGateway
IfBriIfRemoteIp
IfBriIfRemoteIpMask
Page
190
191
191
192
192
192
193
version 3.1
57
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS