Newtec EL470 - Page 20

Unit Menu Reference Manual for EL470 IP Satellite Modem
Command
SyDevRmcpVer
RMCP version RMCP version
Location /Unit/Setup
Description
Readout of the current RMCP version. It allows controlling devices to
distinguish between RMCP versions and adapt their functionality
accordingly.
• RMCP version 2.0 is the enhanced protocol that can be used when
designing new management systems. Contact Newtec to obtain a
copy of the separate RMCP user manual.
RMCP
Command
CRV Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyDevRmcpVer
OID 1.3.6.1.4.1.5835.3.1.1.1.26.0.1
Values Factory Default
rmcp2
Enumeration Value
V2.0 2
Command
SyDevRtc
System time System time
Location /Unit/Setup
Description
Configuration command to read or modify the real time clock. The format
is hh:mm:ss dd/mm/yyyy.
RMCP
Command
RTc Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyDevRtc
OID 1.3.6.1.4.1.5835.3.1.1.1.59.0.1
Values Factory Default
16:24:53
14/05/2003
String Description
length : 0 .. 19
format : \d{2}:\d{2}:\d{2} \d{2}/\d{2}/\d{4}
Command
SyDevUptime
System uptime System uptime
Location /Unit/Setup
Description
Readout of the time passed since last device boot. The data is displayed
in days, hours, minutes and seconds.
Remark: This data is the uptime of the operating system, not the uptime of
the application.
RMCP
Command
Upt Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyDevUptime
OID 1.3.6.1.4.1.5835.3.1.1.1.84.1.1
version 3.1
13
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS