Unit Menu
Reference Manual for EL470 IP Satellite Modem
Command
SyEthTransType
Ethernet M&C
transport protocol
Transport protocol
Location /Unit/Setup/Ethernet settings
Description
Configuration of the Ethernet interface transport layer. TCP (default) uses
acknowledgements to confirm reception of messages while UDP does not.
UDP has the advantage of being faster since it does not require the wait
for acknowledge. Furthermore RMCP over Ethernet already has protection
on the RMCP layer by means of the CRC. So there is no need for the
extra protection provided by the TCP-transport layer.
RMCP
Command
Ett Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyEthTransType
OID 1.3.6.1.4.1.5835.3.1.1.1.37.0.1
Values Factory Default
tcp
Enumeration Value
TCP
UDP
0
1
Command
SyDevMacAddr
Device MAC address Device MAC address
Location /Unit/Setup/Ethernet settings
Description
Readout of the device MAC address.
RMCP
Command
DMA Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyDevMacAddr
OID 1.3.6.1.4.1.5835.3.1.1.1.17.0.1
Values Factory Default
00:06:39:00:10:5D
String Description
length : 17 (fixed)
format : ^([\da-fA-F]{2}:){5}[\da-fA-F]{2}$
version 3.1
16
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
