Modem
Reference Manual for EL470 IP Satellite Modem
Command
MoAcmCtrlMinMargSpec
Min margin Min margin
Location /Modem/Control/Modulation/ACM control
Description
Configuration of the margin specification for the ACM controller before
going to a lower modcod. Different margin specifications for different
modcods can be specified in the following way: 1-10:0.50 11-28:1.0 which
means that for modcods 1 to 10 a difference of 0.5 dB is needed between
the theoretical Es/No for a given modcod and the measured Es/No before
changing the current modcod, for modcods 11 to 28 a difference of 1 dB is
necessary.
RMCP
Command
mms Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoAcmCtrlMinMargSpec
OID 1.3.6.1.4.1.5835.3.1.3.1.136.1.1
Values Factory Default String Description
length : 0 .. 30
format : any chars
Command
MoAcmCtrlTgtMargSpec
Tgt margin Tgt margin
Location /Modem/Control/Modulation/ACM control
Description
Configuration of the margin specification for the ACM controller before
going to a higher modcod. Different margin specifications for different
modcods can be specified in the following way: 1-10:0.50 11-28:1.0 which
means that for modcods 1 to 10 a difference of 0.5 dB is needed between
the theoretical Es/No for a given modcod and the measured Es/No before
changing the current modcod, for modcods 11 to 28 a difference of 1 dB is
necessary.
RMCP
Command
tms Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoAcmCtrlTgtMargSpec
OID 1.3.6.1.4.1.5835.3.1.3.1.137.1.1
Values Factory Default String Description
length : 0 .. 30
format : any chars
Command
MoAcmCtrlDistortSpec
Distortion Distortion
Location /Modem/Control/Modulation/ACM control
Description
Configuration of the distortion specification for the ACM controller.
RMCP
Command
Dst Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoAcmCtrlDistortSpec
version 3.1
86
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
