Newtec EL470 - Page 94

Modem Reference Manual for EL470 IP Satellite Modem
Command
MoAcmCtrlDistortSpec
Distortion Distortion
OID 1.3.6.1.4.1.5835.3.1.3.1.135.1.1
Values Factory Default String Description
length : 0 .. 30
format : any chars
Command
MoAcmCtrlMonitorOnly
ACM monitoring only ACM monitoring only
Location /Modem/Control/Modulation/ACM control
Description
Configuration command to enable a special ACM monitoring mode. When
this field is enabled, the ACM controller will only monitor the system and
not actually change the modcod. This is useful to simulate the real
behaviour.
RMCP
Command
amo Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoAcmCtrlMonitorOnly
OID 1.3.6.1.4.1.5835.3.1.3.1.123.1.1
Values Factory Default
disabled
Enumeration Value
Disabled
Enabled
0
1
Command
MoAcmFwSigPlane
ACM fw sig plane ACM fw sig plane
Location /Modem/Control/Modulation/ACM control
Description
Select control plane for ACM controller forward signalling:
• MonCon management IP network
• Inband RF channel
RMCP
Command
afp Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoAcmFwSigPlane
OID 1.3.6.1.4.1.5835.3.1.3.1.157.1.1
Values Factory Default
moncon_ip
Enumeration Value
Moncon IP mngt LAN
Inband RF
0
1
version 3.1
87
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS