PPA5xx/15xx communications manual
i
IMPORTANT SAFETY INSTRUCTIONS
This equipment is designed to comply with BSEN 61010-1
(2001) (Safety requirements for electrical equipment for
measurement, control, and laboratory use) – observe the
following precautions:
Ensure that the supply voltage agrees with the rating of
the instrument printed on the back panel before
connecting the mains cord to the supply.
This appliance must be earthed. Ensure that the
instrument is powered from a properly grounded supply.
The inputs are rated at 1kV rms or dc cat II; 600V rms
or dc cat III. Do not exceed the rated input.
Keep the ventilation slots in the top and sides of the
cover free from obstruction.
Do not operate or store under conditions where
condensation may occur or where conducting debris
may enter the case.
There are no user serviceable parts inside the
instrument – do not attempt to open the instrument,
refer service to the manufacturer or his appointed
agent.
Note: Newtons4th Ltd. shall not be liable for any
consequential damages, losses, costs or expenses
arising from the use or misuse of this product
however caused.
To Next Page
Loading...
Need help?
General
