PPA5xx/15xx communications manual
ii
ABOUT THIS MANUAL
This manual gives details of the communication commands
recognized by the PPA5xx and PPA15xx series of
instruments over RS232, USB, GPIB (where fitted) or LAN.
For more general operating instructions for the instrument
refer to the specific user manual.
Each command is listed alphabetically with details of any
arguments and reply. Although most of the commands
apply to all instruments in the range there are some
commands that are specific to one instrument or another.
The information in this manual is believed to be accurate
and complete but Newtons4th Ltd cannot accept any
liability whatsoever for any consequential damage or
losses arising from any errors, inaccuracies, or omissions.
Revision v2.83
This manual is copyright © 2006-2018 Newtons4th Ltd.
and all rights are reserved. No part may be copied or
reproduced in any form without prior written consent.
24
th
January 2018