Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
19
NDiS M535 User Manual
Chapter 3: System Setup
ChaPter 3: system setuP
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
CAUTION!CAUTION!
1. The screws on the back and sides are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
2. With the screws removed, lift up the cover and remove it from the chassis.
Screws on the sides
Screw on the back
To Next Page
Loading...
