Nexcom NDiS M535 - BIOS Security and Boot Settings

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
39
NDiS M535 User Manual
Chapter 4: BIOS Setup
Security
Advanced Security Boot Save & ExitMain
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
Boot
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Boot Mode
Configures the boot mode as Legacy BIOS or UEFI BIOS Mode.
Launch PXE OpROM
Enables or disables the boot option for legacy network devices.
Advanced
Security
Boot
Save & ExitMain
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the keyboard NumLock
state
Boot Configuration
Bootup NumLock State
Boot Mode
Launch PXE OpROM
Boot Option Priorities
[On]
[UEFI Mode]
[Disabled]