Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page 11.
How to scroll through menus and make different settings is described on
page 16.
Set the indoor climate
2X
MY INSTALLATION
INDOOR CLIMATE
HOT WATER
INFO
The mode for setting the indoor temperature is accessed by pressing the OK
button twice, when in the start mode in the main menu. Read more about
the settings on page 25.
Increase hot water volume
2X
1X
INDOOR CLIMATE
HOT WATER
MY INSTALLATION
INFO
To temporarily increase the amount of hot water (if a hot water heater is in-
stalled to your SMO 40), first turn the control knob to mark menu 2 (water
droplet) and then press the OK button twice. Read more about the settings
on page 47.
In event of disturbances in comfort
If you experience a disturbance in comfort of any kind, there are some
measures you can take yourself before you need to contact your installer.
See page 78 for instructions.
To Next Page
Loading...
