Nibe SMO 40 - Alarm Log

ALARM LOG
alarm log 3.4
TB alarm
LP alarm
Sensor flt:BT6
Sensor flt:BT2
Sensor flt:BT1
To facilitate fault-finding the installation's
operating status at alarm alerts is stored
here. You can see information for the 10
most recent alarms.
To view the run status in the event of an
alarm, mark the alarm and press the OK
button.
alarm log 3.4
outdoor temp.
condenser return
condenser out
addition
hot water charging
heat medium flow
evaporator
operating time
-
-
-
-
-
-
-
-
op. mode
-
Information about an alarm.
Menu
3.4
NIBE SMO 40Chapter 3 | SMO 40 – at your service54