Maintenance of SMO 40
REGULAR CHECKS
Your heat pump requires minimal maintenance after commissioning. On
the other hand, it is recommended that you check your installation regu-
larly. For more information regarding the maintenance of heat pumps
and/or accumulator tanks/water heaters, refer to the relevant manual.
If anything unusual occurs, messages about the malfunction appear in
the display in the form of various alarm texts. See alarm management
on page 78.
SAVING TIPS
Your installation produces heat and hot water. This occurs via the control
settings you made.
Factors that affect the energy consumption are, for example, indoor
temperature, hot water consumption, the insulation level of the house
and whether the house has many large window surfaces. The position
of the house, e.g. wind exposure is also an affecting factor.
Also remember:
• Open the thermostat valves completely (except in rooms where you
want it to be cooler). The thermostats slow the flow in the heating
system, which SMO 40 wants to compensate by increasing the tem-
perature. The installation will then work harder and consequently also
consume more energy.
• You can lower the temperature when away from the house by
scheduling "holiday setting" in menu 4.7. See page 71 for instructions.
• If you activate "Hot water Economy", less energy is used.
21Chapter 2 | The control module – the heart of the houseNIBE SMO 40
To Next Page
Loading...
