Nibe SMO 40 - Heating Curve Settings

CURVE
heating curve
heating curve 1.9.1.1
system
outdoor temp. °C
flow temperature °C
Setting range: 0 – 15
Default value: 9
cooling curve (accessory
required)
cooling curve 1.9.1.2
system
outdoor temp. °C
flow temperature °C
Setting range: 0 – 9
Default value: 0
Menu
1.9.1
The prescribed heating curve for your house can be viewed in the menu heating
curve . The task of the heating curve is to give an even indoor temperature, re-
gardless of the outdoor temperature, and thereby energy efficient operation. It
is from this heating curve that the control module's control computer determines
the temperature of the water to the heating system, supply temperature, and
therefore the indoor temperature. Select the heating curve and read off how the
supply temperature changes at different outdoor temperatures here. If there is
access to cooling the same settings can be made for the cooling curve.
33Chapter 3 | SMO 40 – at your serviceNIBE SMO 40