TIP
If you wish to set similar scheduling for every day of the week start
by filling in “all” and then changing the desired days.
TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
Caution
Changes of temperature in accommodation take time. For example,
short time periods in combination with underfloor heating will not give
a noticeable difference in room temperature.
COOLING (HEAT PUMP WITH COOLING FUNCTION
REQUIRED)
Here you can schedule when cooling is permitted in the accommodation for up
to two different time periods per day.
Menu
1.3.2
SCHEDULING COOLING 1.3.2
activated
schedule 2schedule 1
all
mon
tues
wed
thur
fri
sat
sun
21:30 - 06:00
on
Activated
Schedule
Time period AdjustingDay Conflict
29Chapter 3 | SMO 40 – at your serviceNIBE SMO 40
To Next Page
Loading...
