TIP
If you wish to set similar scheduling for every day of the week start
by filling in “all” and then changing the desired days.
TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
Caution
Long term blocking can cause reduced comfort and operating economy.
SCHEDULE SILENT MODE
Here you can schedule whether the heat pump is to be set to "quiet mode" (the
heat pump must support this) for up to two different time periods and two dif-
ferent max. frequencies. In this way, you can reduce the sound during the day
and also reduce it further at night.
Menu
4.9.6
When scheduling is active the "quiet mode" symbol is shown in the main menu
on the symbol for the control module.
activated
schedule 2schedule 1
all
mon
tues
wed
thur
fri
sat
sun
schedule silent mode 4.9.6
Time periodDay
Activated
Schedule
Conflict
Schedule: The period to be changed is selected here.
NIBE SMO 40Chapter 3 | SMO 40 – at your service76
To Next Page
Loading...
