When you have selected a new speed a clock starts a count down. When the
time has counted down the ventilation speed returns to the normal setting.
If necessary, the different return times can be changed in menu 1.9.6.
The fan speed is shown in brackets (in percent) after each speed alternative.
TIP
If longer time changes are required use the holiday function or
scheduling.
SCHEDULING
scheduling 1.3
cooling
ventilation
off
off
heating
off
In the menu scheduling indoor climate
(heating/cooling/ventilation) is scheduled
for each weekday.
You can also schedule a longer period
during a selected period (vacation) in
menu 4.7.
Menu
1.3
HEATING
Increases or decreases in the accommodation temperature can be scheduled
here for up to three time periods per day. One step is usually enough to change
the room temperature by one degree, but in some cases several steps may be
required.
Menu
1.3.1
If a room sensor is installed and activated, the desired room temperature (°C) is
set during the time periods.
27Chapter 3 | SMO 40 – at your serviceNIBE SMO 40
To Next Page
Loading...
