SCHEDULING
scheduling 1.3
cooling
off
heating
off
In the menu scheduling indoor climate
(heating/cooling) is scheduled for each
weekday.
You can also schedule a longer period
during a selected period (vacation) in menu
4.7.
Menu
1.3
HEATING
Increases or decreases in the accommodation temperature can be scheduled
here for up to three time periods per day. If a room sensor is installed and activ-
ated the desired room temperature (°C) is set during the time period. Without
Menu
1.3.1
an activated room sensor the desired change is set (of setting in menu 1.1). One
step is usually enough to change the room temperature by one degree, but in
some cases several steps may be required.
SCHEDULING HEATING 1.3.1
activated
schedule 2
system
schedule 3schedule 1
all
mon
tues
wed
thur
fri
sat
sun
21:30 - 06:00
20.5°
Time period AdjustingDay
Activated Schedule System
Conflict
Schedule: The schedule to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times are
not affected at deactivation.
NIBE VVM 320Chapter 3 | VVM 320 – at your service28
To Next Page
Loading...
